Roll over image to zoom in
ZKTeco TL300Z
$248.95$252.00 (-1%)
TL300Z is an advanced fingerprint keypad smart lock with Zigbee communication. With the robust Zinc Alloy casing and multiple locking mechanisms, it provides security performance in all aspects. The additional Zigbee Gateway allows you to unlock the door lock remotely, check the log history, share the temporary or dynamic passcode, and modify the lock’s features via ZSmart
ZKTeco TL300Z
Tl300Z | |
---|---|
Material | Zinc alloy |
Mortise | China Standard Anti-Theft Mortise |
Identification mode | Smartphone, fingerprint, password, and card |
User capacity | 100 |
Fingerprint capacity | 100 |
Passwords capacity | 100 |
Card capacity | 100 |
Fingerprint sensor | Capacitive (silicon) |
Card reader | Compatible with IC card and NFC |
Audio notice | English, Spanish, Portuguese |
Communication | Zigbee |
Remote access | Zigbee Gateway required |
Power supply | 8 AA alkaline batteries (not included) |
Backup power | Micro-USB port compatible |
Battery duration | Up to 3 years (approximately 20,000 accesses) |
Door thickness | 38-60mm (standard) |
Dimensions W x H x E | Front – 83 * 345 * 33 (mm) Back – 83 * 345 * 29 (mm) |
Color options | Matt nickel / Black |
Operating temperature | -20 ° C to 55 ° C |
Operating Humidity | 10% ~ 90% RH (no condensation) |
More Details
Emergency Charging: The bottom of the outdoor unit is provided with a Micro-USB
interface. Use a power bank to charge the lock when it is out of power.
Emergency Mechanical Key: The mechanical key is used to open the door when the
the lock has an electronic malfunction.
Double Locking: Double locking prevents the lock from being unlocked from the
outside. You can enable it by rotating the double locking knob.
How To Use
Resetting the Lock
Press and hold the Reset Button, then touch the keypad, keep holding the Reset
Button until you hear an audio prompt “Restore to default settings, wait a moment”.
After a few seconds, the lock will prompt “Completed”.
Activating the Lock
Touch the keypad with the back of your hand or fingers to activate the lock.
Registering the First Administrator
1. Touch the keypad to activate the lock.
Press the 0 and # keys to access the menu.
2. Enter a new three-digit user number e.g. 001.
3. Press fingerprint thrice or enter a six-digit password twice, or swipe card.
4. Press the * key to complete registration or press the # key to continue registering another administrator.
Programming the Features through Menu Mode
1. Touch the keypad to activate the lock.
2. Press the 0 and # keys to access the menu.
Verify the administrator’s identity with his/her fingerprint or card, or by entering
3. the password then pressing the # key to confirm.
4. Enter the digit corresponding to the function to be performed by following the
audio guide
Note:
1. The registered password must be six digits.
2. If you try to register the same fingerprint/password/card again, the lock will
prompt “Already Used!”.
3. The currently logged-in administrator cannot delete his/her admin data
4. Always Open Mode and Lockout Mode cannot be enabled at the same time.
When you enable one of the two modes, the previously enabled mode will be
automatically canceled.
Reviews
There are no reviews yet.